Zinsser AllCoat Exterior Gloss (Solvent Based) Tintable – Anmeldelser

Zinsser Allcoat Exterior Gloss (Solvent Based) - Ideal Solution For All Exterior Surfaces This high-performance paint is specifically designed to resist mould and mildew, ensuring your surfaces look bright and beautiful for years to come. Its silicon alkyd formula provides unparalleled weather resistance, making it suitable for the toughest conditions. Application For the best results, ensure surfaces are clean, dry, and free of any contaminants. Remove all loose or peeling paint and chalky residue. Sand edges of any remaining paint film until smooth. New surfaces must be cured for at least 30 days before painting. Surface Preparation: Abrade and degrease glossy surfaces. Prime new or bare surfaces with Zinsser Bulls Eye 123 or Zinsser Cover Stain as appropriate. Painting: Apply two coats using a synthetic bristle brush, roller, or sprayer. For airless spraying, use a .017” tip and high-medium (2000-2500 PSI) pressure. Conditions: Apply when air and surface temperatures are between 5°-32°C and humidity is less than 85%. Avoid direct sunlight and maintain a "wet edge" to prevent lapping. Performance Zinsser AllCoat Exterior Gloss (Solvent Based) ensures a durable and attractive finish. It dries to touch in 4 hours and is hard dry after 16 hours. Full adhesion and hardness develop in 7 days. Normal application is two coats, with an additional coat recommended for high-exposure areas such as sills and fascia boards. Limitations and Recommendations Do not apply if the temperature is likely to fall below 5°C during the drying time. Zinsser AllCoat Exterior Gloss (Solvent Based) is not intended for application to exterior floors, decks, or any surface subject to water immersion or prolonged contact with water. Cleanup Clean application tools, spatters, and spills immediately with White Spirit. Follow equipment manufacturer’s directions to clean spray equipment, and remove dried product with White Spirit. Health and Safety Handle with care, using appropriate personal protective equipment. Store in a cool, dry, well-ventilated area away from heat and ignition sources. Dispose of contents and container in accordance with local, regional, national, and international regulations. UN Number: 1263 Hazard Class: 3 Contains: hydrocarbons, C9-C11, n-/ iso-/ cyclo-alkanes, < 2% aromatics, hydrocarbons, aromatic, C9 Diisocyanates: None